Carpet Professional Cleaning

The CARPET program includes the widest range of machines and accessories for professional carpet cleaning. The whole range is characterized by reliability and robustness.

• Our carpet cleaning solutions ensure that the carpet is clean like a brand new carpet.
• It has extremely reduced drying time as the carpet can be dry in just 1 hour!
• It has user-friendly cleaning operations.

The Method incorporates cleaning factors like chemical action, mechanical action, temperature, time and vacuuming simultaneously and optimally. Each factor has been optimized by the design of special systems and devices that are added to a basic injection-extraction machine, transforming it into a “Professional SET” for carpet cleaning.

Injection-extraction system

With the injection-extraction system, a solution of water and chemical is sprayed into the carpet’s fibers and immediately sucked out. The solution and the dirt that is removed are recovered directly into the dirty water tank of the machine. With this method, it would usually take many passes on the same carpet area to complete the cleaning process.

High Waterlift technology

After cleaning, the drying time of the carpet depends on the vacuum strength. A specially designed high waterlift vacuum system has been developed, which allows them to get up to 50% higher waterlift and recover up to 95% of the sprayed solution.
This results in an extremely shorter drying time and a better cleaning result.

Injection-extraction system with mechanical brushing action

The cleaning result is improved with the mechanical action of a rotating cylindrical brush. This allows complete cleaning of each fiber by removing dirt from its base, which otherwise resurfaces in a few days after cleaning. The mechanical action of the brush is therefore essential to obtain a professional result.

Instant hot water system

In carpet and textiles cleaning, the cleaning result can be improved by using a hot solution. The instant heating system provides hot water immediately after switching the machine on.

Carpet pre-spraying

A pre-spray of a concentrated chemical solution is usually recommended before starting cleaning. As it provides the appropriate quantity of chemical, without over wetting the carpet.
The extended contact time of the chemical assists the removal of dirt from the fibers, therefore achieving better cleaning results and reducing the time spent on the subsequent cleaning operations.
We have developed the SMARTKIT, a patented device that allows the pre-spray process to be done by the same machine used to clean.

Automatic chemical dosing

The solution of water and chemical is usually obtained by directly adding chemical into the solution tank. To get the correct concentration, it is necessary to calculate the quantity of chemical to be added, according to the solution tank capacity. After cleaning, the residual solution in the tank is normally wasted.
The SMARTKIT system allows the chemical to be automatically mixed during the cleaning process. This always provides the correct mixture without wasting any chemical.

Carpet rinsing to remove chemical residuals

After cleaning a carpet with chemical, it is recommended to rinse it afterwards. This is in order to remove any sticky residue that is left, which causes the carpet to re-soil quickly.
With the SMARTKIT system, it is possible to rinse the carpet by simply turning a lever. Therefore no chemical is wasted and time is saved. Rinsing the carpet at the end of the cleaning process will make it re-soil as slowly as if it was new.

Maintenance and restorative deep-cleaning

Our machines are able to work both in maintenance and restorative deep cleaning modes. This is set according to the quantity of dirt to remove and the lapse of time from the previous cleaning.
For a restorative deep cleaning, a water jet, sufficient to completely clean even a very dirty carpet, is sprayed. For maintenance cleaning a reduced quantity of water is sprayed.

Lower consumption of water and shorter drying time

With the combined use of mechanical action, high temperature and extended chemical action the cleaning effectiveness improves considerably. Therefore a strip of carpet can be cleaned with a single pass. As a result, water usage is decreased by up to 75%.

Moreover the high waterlift vacuum system allows recovering a higher percentage of water than traditional injection-extraction machines (about 90% against 80%).
After cleaning, the residual solution in the carpet fibers is therefore greatly reduced and the drying time is extremely shortened: the carpet can be dry in 1 hour!

Reduced consumption and environmental respect

Using our method, the time it takes to clean 1 square meter is reduced by up to 67% and much less effort is required from the operator. The use of water and chemical can also be reduced by up to 80%. All these features coincide with the growing demand of the cleaning sector to be responsible in the use of resources involved in the cleaning process.
Box extractors are composed by machine body, hoses and external wand used to spray and vacuum carpet. An optional Power brush wand can be used instead of the normal wand. By adding special options, a box extractor can be transformed in a Professional carpet cleaning set, which combines all the cleaning factors in an optimal way, giving incomparable cleaning results.
Self-contained machines incorporate the cleaning unit below the machine body. The operator moves the machine on the carpet surface, cleaning parallel stripes of carpet. External tools can be used as well, to clean hard-to-reach areas.

Carpet Professional Cleaning